
Orbitech Shotblast LLP offers a Round Bar Shot Blasting Machine for industrial surface cleaning and preparation of round bars, metal rods and other compatible elongated cylindrical workpieces. Designed for production environments that process long metal stock, this machine helps remove rust, mill scale and surface contaminants before further manufacturing, inspection or finishing.
Unlike a batch machine intended primarily for loose castings, a round-bar blasting system is configured around the movement and exposure of long workpieces. Depending on the selected design, bars may pass through a blasting chamber using a suitable roller, feed or conveying arrangement. The machine configuration should be selected according to the bar diameter, length, material, straightness and production requirement.
Round bars and similar metal products require a blasting arrangement that provides appropriate surface coverage along the workpiece. The feed mechanism, blasting-wheel positions and travel speed must be matched to the stock dimensions and the required surface condition.
Orbitech's product range includes round-bar blasting equipment and configurations referenced for small pipes, tubes and round bars. The exact diameter range, maximum bar length, feeding arrangement and production speed should be confirmed for the model being quoted.
The machine can be used for suitable rust and scale removal and for preparing compatible metal stock for downstream operations. Depending on the material and process settings, cleaning can support subsequent coating, inspection or manufacturing stages. The final surface result depends on the incoming condition, abrasive media, blasting intensity and line speed.
Orbitech's product listing describes the Round Bar Shot Blasting Machine as a three-phase motor-driven industrial machine and lists a weight of approximately 5,000 kg. The final installation may also require appropriate abrasive recovery, dust extraction, feed handling and electrical provisions. Confirm the supplied equipment and installation requirements in the technical offer.
Round Bar Shot Blasting Machines are relevant to metal-processing operations where cylindrical stock needs surface cleaning before additional work. Potential applications include fabrication, forging, foundry-related operations and general engineering, subject to the machine's approved workpiece range.
Orbitech Shotblast LLP supplies industrial shot blasting equipment for different workpiece types and production requirements. Choosing the right round-bar machine involves more than selecting a standard model: bar dimensions, feed method, required finish, line speed, abrasive selection and available factory space all affect the final configuration.
When requesting a quotation, provide the minimum and maximum bar diameters, bar length, material grade, initial surface condition, required cleanliness, target throughput and preferred feeding method. Orbitech can then confirm the suitable design, technical specifications, commercial offer and delivery details.
Contact Orbitech Shotblast LLP to discuss your Round Bar Shot Blasting Machine requirement and request a configuration-specific quotation.
The values below are taken from Orbitechs current product listing. Where the listing does not provide a definite engineering value, the specification is marked for confirmation.
| Parameter | Listed specification |
| Product name | Round Bar Shot Blasting Machine |
| Product category | Industrial shot blasting equipment |
| Motor type | Three-phase motor |
| Machine weight | Approximately 5,000 kg |
| Listed size | Standard; exact dimensions not stated |
| Listed colour | Gray |
| Listed applications | Fabrication, foundry and forging |
| Minimum order quantity | 1 unit |
| Listed price | 50,00,000 per unit |
| Listed price range | 25,00,00050,00,000 per unit |
| Listed supply ability | 4 units per month |
| Listed delivery time | 2 months |
Confirm before publishing or quoting: the product page does not clearly specify the power rating, voltage, bar diameter range, maximum bar length, line speed, production capacity, number of blast wheels, abrasive type or dust collector capacity. Request a current, model-specific technical datasheet from Orbitech before adding these values to the page. The displayed price and delivery time should also be reconfirmed.
The actual operating sequence depends on the machine design and should follow the manufacturer's instructions.
Orbitech lists the Round Bar Shot Blasting Machine within its industrial shot blasting equipment range, alongside other specialized systems for different workpiece shapes and production needs.
A Round Bar Shot Blasting Machine is used to clean and prepare compatible cylindrical metal stock by projecting abrasive media onto its surface. It is designed around the handling and blasting requirements of long bars rather than loose batches of small components.
Typical uses include removing rust, mill scale and surface contaminants from suitable round bars before further processing, inspection or coating.
Potential users include steel fabrication, forging, foundry-related operations and general metal processing facilities. Suitability depends on the workpiece dimensions and the selected machine configuration.
Orbitech lists the machine at approximately 5,000 kg. Confirm the final installed weight and foundation requirements for the exact model.
orbitechshotblast.com
The product listing specifies a three-phase motor but does not clearly state the complete power rating or voltage. Request the electrical datasheet to confirm the connected load, voltage, frequency and protection requirements.
The product page does not provide a definite diameter range. Share the smallest and largest bar diameters with Orbitech so the company can confirm the suitable machine configuration.
The product range references round-bar blasting equipment, but the exact feed arrangement and continuous-processing capability must be confirmed for the offered model. Ask about conveyor type, maximum bar length, line speed and loading method.
The machine is intended for surface preparation of metal stock. The achievable cleaning result depends on the initial surface condition, abrasive type, blasting intensity and workpiece travel speed.
Orbitechs listing displays 50,00,000 per unit and a listed price range of 25,00,00050,00,000. These are catalogue figures and should be confirmed directly with the company for a current quotation.
orbitechshotblast.com
Visit the official Round Bar Shot Blasting Machine page. Include bar diameter, length, material, target throughput, surface condition and required finish in your enquiry.

Price:
Price 1500000.0 INR / Piece
Minimum Order Quantity : 1 Piece
Usage : Surface Preparation
Size : 1500 mm swing table
Weight : 6000 Kilograms (kg)
Color : Customised
Price 1500000 INR / Unit
Minimum Order Quantity : 1 Unit
Usage : Used in Forging, foundry and fabrication
Size : Standard
Weight : 5000 Kilograms (kg)
Color : Green
Price 25200.0 INR / Unit
Minimum Order Quantity : 1 Unit
Usage : Fabrication, Foundry and Forging
Size : Standard
Weight : 5000 Kilograms (kg)
Color : Gray
Price 67200.0 INR / Unit
Minimum Order Quantity : 1 Piece
Usage : Industrial
Size : Standard
Color : Gray