
Orbitech Shotblast LLP is a manufacturer and supplier of Tumblast Machines in India, providing industrial shot blasting solutions for batch cleaning of small and medium-sized metal components. Designed for foundries, automotive component manufacturers, forging units, and engineering industries, the Tumblast Machine removes rust, mill scale, sand, and other surface contaminants through controlled abrasive blasting.
The machine uses a rotating rubber or wear-resistant tumbling belt to continuously turn and mix compatible workpieces inside an enclosed blasting chamber. High-speed blast wheels propel abrasive media onto the moving components, helping expose multiple surfaces to the abrasive stream during the cleaning cycle. This tumbling action makes the machine suitable for processing batches of castings, forgings, fasteners, hardware, and other durable metal parts.
A Tumblast Machine combines a blasting chamber, tumbling mechanism, abrasive recovery system, separator, and dust collection unit. Its compact batch-processing arrangement supports repeatable cleaning and helps reduce manual surface preparation. Depending on the application, the machine can be configured with different batch capacities, blast-wheel power ratings, and unloading arrangements.
As a Tumblast Machine manufacturer and supplier in India, Orbitech Shotblast LLP provides industrial equipment designed around component size, batch weight, required surface finish, and production requirements.
The Tumblast Machine is widely used in industries that require batch cleaning, descaling, deburring support, or surface preparation of compatible metal components.
Common applications include:
The machine is best suited to components that can tumble without unacceptable damage. Fragile, thin-walled, precision-machined, sharp-edged, or easily entangled components may require a different blasting method or specialized handling arrangement.
The Tumblast Machine operates by combining controlled tumbling with high-velocity abrasive blasting.
First, a batch of compatible metal components is loaded into the machine within the specified load limit. The chamber is closed, and the tumbling belt begins rotating. As the components move and turn inside the chamber, blast wheels propel steel shot, steel grit, or another suitable abrasive toward them.
Repeated abrasive impact removes rust, scale, foundry sand, and surface contaminants. The movement of the components helps expose different surfaces to the abrasive stream during the cycle. The tumbling action must be controlled to avoid excessive part-to-part impact or damage to delicate workpieces.
After blasting, the abrasive and removed debris are collected below the chamber. The recovery system separates reusable abrasive from dust and unwanted particles, while the dust collector extracts airborne contaminants. When the cycle ends and moving parts stop, the processed components are discharged for inspection or further treatment.
Cleaning quality depends on abrasive selection, blast-wheel power, batch size, tumbling speed, cycle duration, and the condition of the components.
The following are indicative reference specifications for a standard industrial Tumblast Machine. Actual values depend on the required batch capacity, component type, and machine configuration.
| Specification | Indicative Details |
| Product Name | Tumblast Machine |
| Machine Type | Batch-Type Tumbling Shot Blasting Machine |
| Overall Machine Dimensions | 2800 1800 2200 mm |
| Approximate Machine Weight | 3000 kg |
| Working Chamber Dimensions | 1000 900 700 mm |
| Batch Capacity | Approximately 200 kg per cycle |
| Tumbling Belt Type | Rubber or application-specific wear-resistant belt |
| Blast Wheel Quantity | 2 units |
| Blast Wheel Motor Power | 7.5 kW each |
| Total Blast Wheel Power | 15 kW |
| Blast Wheel Speed | Approximately 2900 RPM |
| Abrasive Type | Steel shot / steel grit |
| Initial Abrasive Charge | Approximately 300 kg |
| Abrasive Flow Rate | Approximately 2 100 kg/min |
| Tumbling Drive Motor | Approximately 3 kW |
| Dust Collector Capacity | Approximately 3000 m/hour |
| Total Installed Power | Approximately 2428 kW |
| Electrical Supply | 415 V, 3-phase, 50 Hz |
| Control System | Electrical control panel |
| Typical Cycle Time | Approximately 515 minutes per batch |
| Abrasive Handling | Collection, separation, and recycling system |
| Chamber Protection | Replaceable wear-resistant liners |
| Loading Method | Manual or mechanical, depending on batch size |
| Unloading Method | Belt discharge or configured discharge arrangement |
| Manufacturing Origin | India |
| Machine Configuration | Standard or application-specific |
Specification note: These are estimated reference values for website content and are not verified factory specifications. Final selection should be based on component dimensions, batch weight, material hardness, required cleanliness, and the possibility of part-to-part damage.
Orbitech Shotblast LLP provides industrial shot blasting equipment for foundries, automotive suppliers, forging facilities, and general engineering manufacturers. Our Tumblast Machine is intended for businesses that need an enclosed and repeatable method of cleaning suitable metal components in batches.
For businesses searching for a Tumblast Machine manufacturer in India or a Tumblast Machine supplier, Orbitech Shotblast LLP offers industrial batch-cleaning equipment for metal surface preparation.
1. What is a Tumblast Machine?
A Tumblast Machine is an industrial shot blasting machine that cleans batches of compatible metal components by tumbling them inside a chamber while abrasive media is projected onto their surfaces.
2. How does a Tumblast Machine work?
A batch of components is loaded into a tumbling chamber. A rotating belt turns the parts while blast wheels propel abrasive media at high velocity, removing surface contaminants. The abrasive is then collected, separated, and recycled.
3. Which components can be processed in a Tumblast Machine?
It is commonly used for compatible castings, forgings, automotive parts, fasteners, brackets, fittings, and other durable metal components that can safely tumble together.
4. What is the batch capacity of a Tumblast Machine?
A representative machine may handle approximately 200 kg per cycle. Actual capacity varies according to the machine size, component shape, material density, and loading arrangement.
5. Which abrasive media is used in a Tumblast Machine?
Steel shot and steel grit are common choices. The selection depends on the workpiece material, initial surface condition, and required surface finish.
6. How long does one tumblast cycle take?
An indicative cycle may range from 5 to 15 minutes per batch. Heavily scaled or contaminated components may require different settings or additional processing.
7. Can a Tumblast Machine remove rust and foundry sand?
Yes. It can remove rust, loose scale, and foundry sand from suitable components. The achievable cleaning level depends on abrasive characteristics, blast intensity, and cycle duration.
8. Is a Tumblast Machine suitable for delicate or precision components?
Not always. Components that may be damaged by tumbling or by impact against other parts should be evaluated carefully. A hanger-type, table-type, or other specialized blasting machine may be more appropriate for fragile workpieces.
9. Does the machine include an abrasive recovery system?
A typical industrial configuration includes abrasive collection and separation equipment to remove dust and debris and return reusable abrasive to the blasting system.
10. How do I choose the right Tumblast Machine manufacturer and supplier in India?
Compare batch capacity, component compatibility, tumbling-belt design, blast-wheel power, abrasive recovery, dust collection, safety features, and maintenance requirements. Orbitech Shotblast LLP can help identify a suitable machine configuration based on the parts to be processed and the required production output.

Price:
Price 1500000.0 INR / Piece
Minimum Order Quantity : 1 Piece
Weight : 6000 Kilograms (kg)
Voltage : 380 to 440 Volt (v)
Color : Customised
Price 2000000 INR / Unit
Minimum Order Quantity : 1 Unit
Weight : 8000 Kilograms (kg)
Color : Blue
Motor Type : 3 Phase Motor
Price 5000000 INR / Unit
Minimum Order Quantity : 1 Unit
Weight : 5000 Kilograms (kg)
Color : Gray
Motor Type : 3 Phase Motor
Price 300000.00 INR / Piece
Minimum Order Quantity : 1 Piece
Weight : Approx. 7800 kg
Voltage : 415 V, 3 Phase, 50 Hz
Motor Type : Electric Motor